Custom AHRMA Legal Number Plate Decals
One set of number plate decals custom made to your personal specifications.
You get one front plate decals and two side plate decals. There are a few
examples below showing just some of the many possible designs. You pick
the numbers, type face and colors. The 70's style is typically the Wild
West numbers, 80's is all about simple fonts or the bitchin' Zeronine numbers.
Also available as backing graphics without numbers for restoration instead
of racing. We can add your name or your race team's name, etc. Tell us what
you need and we'll do it!
Please allow 2-3 weeks for delivery. It takes a little
back and forth to get the design down and then it has to go out to the printer
and back again before I can send them out. If you need them any faster,
its $10 per order to expediate the process.
Early 1970's to 1983 RM125, RM250, RM465 and RM500
(Ovals work for many other makes and models)
Number Plate Builder BETA
I built this online application so you can play with different combinations
of colors and number styles to figure out what you want before you order.
I will be adding more styles of numbers and outlines for the plate background
soon. It's still a little rough around the edges, but I decided to put
it up now rather than wait until I'm finished because it is usefull. Only
works with Internet Explorer. One set of numbers, four colors of square
and oval plates. Let me know what you think!
$49.95 one set (3 decals) plus $7.00 shipping to United States $49.95 one set (3 decals) plus $12.00 shipping to outside US 1989-1998 Suzuki RMX250 radiator shroud decals. With all
the aftermarket decals drying up and no more being produced, I had no choice
but to produce them for my own bikes. Now you can get a set for yourself.
I used the first-year design from 1989 and updated it slightly. I like the
simple design though and I hope you do too. I'm not crazy about most of
the aftermarket designs using so many colors and too complex a layout. Currently
I have designs for yellow and black background versions. I can create them
in any color combinations you'd like though, just email
me and we can discuss. The Suzuki RMX250 uses the 1989-1991 Suzuki RM125/RM250
side panels which I'm also producing now and can be purchased separately.
$29.95 one set (2 decals) plus $6.00 shipping to United States $29.95 one set (2 decals) plus $10.00 shipping to outside US
Set of two 1982 Suzuki RM works-style tank decals made
from high grade, very thick, perforated 3M material. They are made from
the RM125 decals so the stripes a little smaller than the RM250. But, they
still look great on the RM125, RM250 or RM465.
$61.95 each set plus $6.00 shipping to United States
$61.95 each set plus $10.00 shipping to outside US
Set of two 1981 Suzuki RM works-style tank decals made
from high grade, very thick, perforated 3M material. They will work on the
RM125, RM250 or RM465. They'd look great on PE and RS, maybe others?
$61.95 each set plus $6.00 shipping to United States $61.95 each set plus $10.00 shipping to outside US
Set of two side panel stripes with 125cc, 250cc or 465cc call-outs
for 1982 RM125Z, RM250Z & RM465Z. This is a complete set that
includes a stripe flash and 250 or 465 callout for the right and left side
panels.
All of us in this hobby knows that no reproduction part is 100% like OEM
(and anyway, have you priced NOS lately?!?). But especially for a restoration
on a budget, our reproductions frankly leave a number of our better-known
competitors at the starting gate. Through a lot of trial and error, we have
-- and others feel -- that our side flashes/callouts are simply the superior
product.
1) Our decal set has been meticulously matched from Pantone Matching System
equivalents against an NOS set (pictured with the reproductions) to make
our decal set look even better... Can you tell which is which? Tell you
what: look at the photo with the originals, and YOU try to see if you can
tell.
2) Next, our decal sets are printed at a professional decal print shop on
a 720dpi ink jet printer. The ink is chemically enhanced to saturate the
decal paper for long lasting color, similar to screened ink. VERY close
examination may reveal a slight dot pattern, but frankly if you can see
this you can probably also see Venus during daylight. (So why aren't you
in the space program, eh?)
3) Finally, a durable layer of laminate is applied over the ink. No kidding:
this material is made from automotive grade laminated decal material (i.e,
so the decals hold on like the grim death to your sidecover while so you
get on with your race!).
The proof is in the pudding, or in this case, in the order. Our challenge
is clear: you be the judge. If you don't think our sidecover decal sets
are what we say they are, then you should start saving now for those NOS
decals, if you can find them.
125 call-outs are here!
$21.95 each set plus $4.00 shipping to United States $21.95 each set plus $6.00 shipping to outside US Set of two side panel decals for 1981 Suzuki RM125 models.
$21.95 each set plus $4.00 shipping to United States $21.95 each set plus $6.00 shipping to outside US Set of two radiator shroud decals for 1986 RM125 and RM250 models
$29.95 each set plus $4.00 shipping to United States $29.95 each set plus $6.00 shipping to outside US Set of two radiator shroud decals for 1987-1988 RM250 models
$29.95 each set plus $4.00 shipping to United States $29.95 each set plus $6.00 shipping to outside US Set of two radiator shroud decals for 1987-1988 RM125 models
$29.95 each set plus $4.00 shipping to United States $29.95 each set plus $6.00 shipping to outside US Set of two radiator shroud decals for 1985 RM125 & RM250 models
$29.95 each set plus $4.00 shipping to United States $29.95 each set plus $6.00 shipping to outside US Set of two "FULL FLOATER" swingarm decals for 1981-1982 Suzuki RM125,
RM250 and RM465 models. Made to the same high standards as the
rest of our decals. These will replace your worn or faded decals with style!
Copied directly from the OEM versions, these are very acurate and easy to
apply. Die cut and includes a masking tape type top layer for easy application.
$16.95 each set plus $4.00 shipping to United States $16.95 each set plus $6.00 shipping to outside US Set of two "FULL FLOATER" swingarm decals for 1986-1988 Suzuki RM125
and RM250 models. Printed on clear vinyl with another layer of
clear vinyl on top of the ink to look OEM but stand up to the elements.
$16.95 each set plus $4.00 shipping to United States $16.95 each set plus $6.00 shipping to outside US Set of two RMX250 swing arm decals. Designed to complement the radiator shroud decals I make. Or they stand alone or with other decal designs as well. No cutting neccesary. The left side is smaller to accomodate the kick stand mount.
Black/Red
$16.95 each set plus $4.00 shipping to United States $16.95 each set plus $6.00 shipping to outside US
Yellow/Red
$16.95 each set plus $4.00 shipping to United States $16.95 each set plus $6.00 shipping to outside US
Black/Silver
$16.95 each set plus $4.00 shipping to United States $16.95 each set plus $6.00 shipping to outside US Set of two Suzuki 1981, 1982, 1983 RM models side panel transparent
cover-up decals made from high grade material used to protect automobile
body parts from stone chips. They will work on the RM125, RM250 or RM465.
These go over the top of your side panel decals to protect them and your
panels from wear and tear.
$11.95 each set plus $4.00 shipping to United States $11.95 each set plus $6.00 shipping to outside US Set of two Suzuki 1981, 1982, 1983, 1984 RM models airbox transparent
cover-up decals made from high grade material used to protect automobile
body parts from stone chips. They will work on the RM250, RM465 or RM500.
These go over the top of your airbox lids to protect them from wear and
tear. We are working on the RM125 model which are slightly smaller, look
for them in the near future!
$11.95 each set plus $4.00 shipping to United States $11.95 each set plus $6.00 shipping to outside US